Serving Katy, Houston & surrounding areas • Licensed & Insured • 20+ Years (832) 359-2425
EVOTECH technician working inside a network cabinet
Fast EVOTECH reply

Start your EVOTECH request in under a minute.

1 minsimple request
Texaslocal and remote help
Inboxlead saved and emailed
Get a fast EVOTECH response Most requests only need name, phone, city, and service.
Choose a service and EVOTECH will guide the next step.
(832) 359-2425

EVOTECH uses your details only to reply, quote, schedule, or help with your requested service.

Now adding installers · Memorial & the Villages

TV Installation Subcontractor Openings in Houston 77024

Memorial, Hedwig Village, Bunker Hill and Hunters Creek buy very large displays for very large rooms, and the I-10 side of 77024 buys them for lobbies, conference rooms and medical suites. EVOTECH IT LLC wants independent TV installation subcontractors who are genuinely comfortable past the eighty-five-inch mark, who know what stone and steel studs demand, and who can hit a builder’s date.

Large-format panelsStone, stucco and steel studsNew-construction rough-insAfter-hours commercialOwn liability coverage

Big displays, big rooms, and why weight is the first question

On this board the first decision is almost never where the display goes. It is whether the wall, the mount and the crew can carry what the customer bought.

The homes across Memorial and the surrounding villages are large, and the rooms follow. Family rooms with double-height ceilings, dedicated media rooms with tiered seating, game rooms over a garage, and primary suites the size of an apartment. That drives panel sizes that are still uncommon elsewhere in the city, and those panels behave differently from the ones an installer cuts teeth on.

  • Anything past seventy-five inches is a two-person handle, every time, with no heroics. Large panels flex if carried flat and the flex is what kills them, not the drop.
  • Keep the box until the display is on the wall and showing a picture. Repacking a damaged panel into a box you already cut up is a bad afternoon.
  • A long articulating arm is a lever. Extended twenty-four inches or more from the wall, the load at the top fasteners is far higher than the panel weight suggests, and the anchoring has to be sized for that, not for the number on the carton.
  • In a media room with tiered seating, the second row sets the mounting height, not the first. Work the sightlines before the bracket goes up, because moving it later means patching a wall somebody just paid to finish.

Stone fireplaces, stucco returns and steel studs

Three surfaces come up here far more than the city average, and each one punishes the drywall habit.

Stone

Full-bed stone over masonry can genuinely carry an anchor, set in the body of the stone rather than in a mortar joint. Thin veneer over cement board over studs cannot — the veneer is a finish, and the load must reach the framing behind it, with the stone only sleeved through. Cast stone fractures on the blind side as the bit exits, and finishing that hole with an impact driver is how a surround ends up split. Slow speed, correct bit, and stop guessing which of the three you are looking at before you drill: a thin veneer sounds different and its edge reveal at the hearth usually tells you.

Stucco and hard-coat returns

Exterior-grade finishes appear on outdoor kitchens and covered patios across these neighbourhoods. Outdoor displays need weather-rated hardware, a sealed penetration, and a plan for the cable that does not rely on a bead of caulk to stay dry.

Steel studs

Newer construction and almost every commercial build-out on the I-10 side uses light-gauge steel. A lag screw is worthless in it. You want toggle-style or purpose-made steel-stud anchors rated for the load, and on heavy panels the correct answer is often a backing plate spanning several studs.

Heat and mantel depth come before aesthetics. Above a working firebox, the mantel projection and the temperature at the display location decide whether the mount is flat, tilting or pull-down. The office would rather have that conversation with the client than have a panel cooked over a season.

Homes that already have a rack, a closet and a plan

A large share of these houses were wired during construction or a major remodel. There is a structured wiring closet, a rack, category cable pulled to every television location, and sometimes a control system the family uses daily without thinking about it.

You are joining that system, not replacing it. The expectations are simple and firm: photograph the rack and the wall plate before you disturb anything, label everything you unplug, and confirm the source at the rack rather than assuming it is behind the television. Signal may be arriving over an extender pair rather than a direct cable, which changes what a failure means.

If the install needs a change to a control system or a matrix configuration, that is reported to us, not attempted on the spot. Reprogramming somebody’s house so one new display works, and leaving three other rooms broken, is the fastest way off this list.

New construction: you are one trade among many

77024 has constant teardown-and-rebuild activity, and a good portion of our display work on those projects happens twice: once before drywall and once after paint.

VisitWhat happensWhy the timing is unforgiving
Rough-inRecessed boxes set, conduit or pull strings placed, blocking requested behind each display location, cable pulled to the closetEvery one of these is cheap before sheetrock and expensive after. Miss the window and the work becomes a repair
Trim and finishMounts set, panels hung, terminations made, the system proven in front of the builder or the ownerYou are after paint and flooring, so anything you mark is somebody else’s rework

On a live site you follow the site rules without being asked: sign in, hard hat where it is posted, keep the drive clear for deliveries, and take your packaging with you. Other trades are working to the same handover date and a subcontractor who leaves a mess or blocks access gets remembered by the superintendent, which reflects on us.

Access realities inside the incorporated villages

Several of the addresses on this board sit inside their own small incorporated cities rather than in Houston proper, each with its own city hall and its own police department. Practically, that means the streets are watched. A work truck parked half on a lawn, or blocking a narrow village lane, draws a visit that nobody needs.

The rest of the access picture:

  • Long driveways and motor courts — check whether a full-size truck can actually turn before you commit to backing up a hundred feet.
  • Gate codes that change, alarm systems that need disarming by somebody who is not you, and household staff as the point of contact.
  • Heavy tree cover and low limbs over drives, which matters if you are carrying anything tall on a rack.
  • Dogs in yards. Always ask before you open a gate.

The I-10 corridor, usually after hours

North of the residential blocks, the freeway frontage brings offices, medical suites, hotel meeting space and retail. That work looks nothing like a family room install.

Expect early-morning or evening access so the tenant is not disrupted, a building engineer escorting you, badge-in procedures, a certificate of insurance naming the property manager, and a freight elevator that has to be reserved. Above-ceiling cable in a space used as a return air plenum has to be plenum rated, and ceiling tiles come out and go back with clean hands. Conference room displays often terminate in a credenza or a floor box rather than behind the screen, so the cable plan is set before the mount is.

Coverage, credentials and the call list

We contract with independent installers who run themselves as a business: own transport, own tools and access equipment, general liability in force, and a W-9 on file. Commercial properties and builders both ask for certificates, so the coverage has to be verifiable at short notice.

Licensing and insurance sit behind every ticket we issue: EVOTECH IT LLC has run as an insured low-voltage contractor for two decades across this part of Texas and is rated 5.0 stars. Anyone carrying our tickets keeps to the same line — the right licence for the task, cable rated for the wall it goes into, and electrical work left to electricians.

At interview we will want to know the largest panel you have hung and how you handled it, what you have anchored into stone and steel, whether you bring a second installer, whether you have worked a builder’s schedule, and your availability for early-morning or after-hours commercial calls. Rates are agreed when we meet and follow the scope involved plus the experience you bring; we do not print figures.

Phone (832) 359-2425 to start that conversation, or leave a note on the contact form.

Frequently asked questions

Will I be sent out alone to hang a ninety-eight-inch panel?
No. Anything past roughly seventy-five inches is handled by two people on our tickets. Let us know up front whether a second installer travels with you or whether you would need pairing, since that governs which large-format addresses you see.
How should thin stone veneer over a fireplace be anchored?
Through it, not into it. Thin veneer is a finish over cement board and studs, so the fasteners have to reach the framing behind while the stone is only sleeved. Full-bed stone over masonry is different and can take an anchor set in the body of the stone, never in a mortar joint alone.
The house already has a rack and a control system. How much am I expected to touch?
As little as possible. Photograph and label before you disturb anything, confirm the source at the rack, and report anything that needs a configuration change instead of making it. Breaking three working rooms to finish a fourth is the outcome we are trying to avoid.
What does a new-construction rough-in visit involve?
Setting recessed boxes, placing conduit or pull strings, requesting blocking behind each display location, and pulling cable back to the wiring closet — all before sheetrock. It is a short visit with a hard deadline, because every item on that list becomes a demolition job once the walls close.
Are the village streets genuinely an issue for a work truck?
Yes. Several neighbourhoods here are separate incorporated cities with their own police departments and narrow lanes. Park on the property where you can, keep drives clear, and check that a full-size vehicle can turn before you commit to a long private driveway.
Do the commercial jobs on the freeway side run at night?
Often early morning or evening, because the tenant needs the space during business hours. Those appointments come with building-engineer escort, badge-in, a certificate naming the property manager, and a reserved freight elevator, so they are scheduled rather than same-day.

Do you handle large-format panels without drama?

Then this side of Houston has steady work. Dial (832) 359-2425, or send the contact form and name the biggest panel you have put on a wall.

Apply for Subcontract Work
EVOTECH technician working inside a network cabinet
Before you go

Ready for EVOTECH to help?

Before you leave, send the quick version. We will review the page you came from and reply with the clean next step.

1 minsimple request
Texaslocal and remote help
Inboxlead saved and emailed
Send the quick request No long questionnaire. A real EVOTECH lead comes straight to the inbox.
Choose a service and EVOTECH will guide the next step.
(832) 359-2425

EVOTECH uses your details only to reply, quote, schedule, or help with your requested service.

Need TV Mounting Pricing? - Houston
Call, message, or request a free estimate for TV mounting, soundbar setup, and cable concealment.
Fast quote today • Same-day response available
Call Now: 832-359-2425 Chat on WhatsApp Book Appointment
Free Estimate Request
Thank you. EVOTECH received your request.
Fast quote • Call, WhatsApp, or send your request now
Free TV Mounting Estimate
Need TV mounting, soundbar setup, or cable concealment? Send your details now.
Thank you. EVOTECH received your request.
Call 832-359-2425