Start your EVOTECH request in under a minute.
TV Mounting Jobs in Brookshire, TX 77423
EVOTECH IT LLC keeps a short list of mounting installers and low-voltage subcontractors who can work the far-west end of the I-10 corridor. If you own your tools, carry your own insurance and can finish a clean job in a house with no attic access, we want to hear from you.
What the work looks like out here
A work order in 77423 seldom matches the tidy picture people carry around of television installation. This ZIP covers a slice of Waller County where three very different kinds of building sit within a few miles of each other, and the wall behind the screen decides how the rest of the day goes.
Broadly, the structures you will be sent into fall into four buckets:
- Older farm and ranch houses. Lath, plaster, shiplap and true-dimension lumber that behaves nothing like modern framing. An electronic stud finder will lie to you in these walls; a fine finish nail and a rare-earth magnet will not.
- Manufactured and modular homes. Thin wall panels over light framing, frequently at non-standard spacing, with no dependable blocking. These call for a wider mounting plate, a through-bolted backer board, or a floor-supported solution — and sometimes the honest answer is that the wall the homeowner picked cannot carry the screen.
- Metal shops, barns and barndominiums. Purlins, C-channel and light-gauge steel. Self-drilling fasteners and a good step bit earn their place in the bag on these calls.
- New tract construction. The subdivisions pushing west along FM 359, FM 1489 and the US 90 frontage use conventional wood framing with predictable blocking. Those are the fast ones, and they are the minority.
Slab-on-grade with no usable attic run is common on the older stock, so expect to plan for surface raceway, an exterior-rated route, or a frank conversation with the homeowner about where the cable can actually go. We would far rather have you stop and call the office to re-scope than force a run that will look wrong for the next ten years.
The 77423 territory and what sits inside it
77423 is wider than the city limits sign suggests. The footprint we dispatch into from here takes in unincorporated Waller County, the acreage tracts north of the interstate, and the ribbon of frontage-road development on both sides of I-10.
Residential side
Large lots, long driveways, detached garages and separate shops. Parking a hundred feet from the front door is normal, so a folding equipment cart matters far more here than it does in town. Covered patios and outdoor entertaining areas are popular on these properties, which means outdoor-rated mounts, weather-sealed terminations and sun-glare positioning come up in conversation constantly.
Light commercial side
The warehouse and distribution buildings along the corridor generate a steady trickle of break-room screens, dispatch-board displays, office monitor arms and lobby signage. A commercial call runs on a different rhythm: sign-in at a front desk, a short safety briefing, hard hat and vest, and an open deck instead of a drywall ceiling. Installers who are genuinely comfortable on that side are the ones we are shortest of in this area.
Drive-time realities
- Cell coverage thins out quickly once you leave pavement. Pull down the work order, the site photos and the gate notes before you turn off the highway.
- Plenty of properties have a keypad, a chain or a cattle gate. Entry instructions belong on the confirmation call, not in the driveway.
- Loose dogs, livestock and unpaved turnarounds are routine. Look at your approach before you commit to backing a truck in.
- Katy sits roughly fifteen to twenty minutes east on I-10, so a Brookshire stop is often paired with a Katy, Fulshear or Cypress stop on the same route.
Tools and truck stock you’re expected to carry
We do not hand out tools. A sub who arrives short-stocked burns the appointment window and the customer’s patience, so this is the honest baseline for mounting work in this ZIP.
| Category | What we expect on the truck |
|---|---|
| Fastening | Impact driver, hammer drill, masonry bits, self-drilling metal fasteners, lag bolts and structural screws in several lengths |
| Locating | A stud finder you actually trust, rare-earth magnets, a bright inspection light, and the discipline to verify twice before drilling once |
| Leveling | Torpedo and four-foot levels, a laser level, tape, pencil and a mounting template |
| Access & protection | Step ladder plus an extension or multi-position ladder, drop cloths, shoe covers, a shop vacuum |
| Cable | In-wall rated HDMI, fish tape and glow rods, low-voltage brackets, wall plates, surface raceway, ties and hook-and-loop wrap |
| Finish | Touch-up compound, a putty knife and a damp rag — the mount is not finished until the wall looks like nobody was there |
Mounts, in-wall power solutions and any specialty hardware are specified per job. If a scope needs something outside your normal stock, you will know before you accept it, not after you are standing in the living room.
Who we can actually put on a schedule
EVOTECH IT LLC is a licensed and insured low-voltage contractor that has been doing this work around Houston for more than twenty years, and everyone who represents us on a customer’s property is held to the same line.
- Demonstrable mounting experience. Not a résumé — photographs of your own finished work, including at least one job where the wall fought back.
- Your own general liability coverage. We ask for a current certificate before the first dispatch and we keep it on file.
- Dependable transport and a phone that stays charged. Routes out here are long and there is nothing to walk to.
- Clean, identifiable appearance. Closed-toe boots, a shirt without holes, and a name you give at the door.
- Willingness to be background checked. You are walking into people’s homes, often while their children are there.
If you already hold a Texas low-voltage registration, an electrical apprentice card, or an OSHA 10 or 30 card, mention it on the first call. It widens the kind of work we can route to you, because the same trucks that hang screens also pull network cable and set cameras.
How dispatch and scheduling actually run
No guessing and no group-chat free-for-all. Here is how a job travels from the office to your truck and back.
- Offer. You receive the scope, the address, the wall type where we know it, the equipment list and the appointment window. Accept or pass — passing is completely fine, going silent is not.
- Confirmation call. You reach the customer ahead of the window to lock down gate codes, parking and exactly where they want the screen to live.
- On site. Walk the wall with the customer before a single hole is made. Anything that changes the scope goes back to the office first.
- Documentation. Before and after photographs, the mount level, the cable managed, the packaging hauled out.
- Handoff. Show the customer how the arm articulates and how to power everything up. The sign-off is part of the job, not an afterthought.
Subcontractors do not collect payment on site, do not negotiate price at the door and do not sell add-ons. Quoting belongs to the office; if a customer wants more work, you flag it and we take it from there. That rule protects you at least as much as it protects them.
How to apply for mounting work
The quickest route is the phone. Call (832) 359-2425 and say you are calling about installer work in the Brookshire area, or send the details through our contact page and we will come back to you.
Have this ready and the conversation takes ten minutes instead of three separate calls:
- How long you have been mounting, and whether that has been residential, commercial or a mix
- Photographs of three finished jobs — ideally one of them on stone, brick or a metal-framed wall
- Whether you currently carry general liability or would need to put a policy in place
- Your honest availability: weekday daytime, evenings, weekends, or some combination
- How far you are willing to travel out from 77423
Compensation is discussed during the interview and depends on the scope of work you take on and the experience you bring to it. We would rather have that conversation directly than publish a number that does not survive contact with a real job.
Related services
Frequently asked questions
Do I need my own ladder and truck to run Brookshire routes?
How far past Brookshire do the routes actually go?
What do you want me to do when a house has no attic access and no crawl space?
Do you take installers who only want part-time or weekend work?
How is compensation handled for subcontractor work?
Looking for mounting work around Brookshire?
Call (832) 359-2425 or send us a note covering your experience, your tools and your availability. We will talk scope and compensation on the phone.
Apply for Installer Work
Ready for EVOTECH to help?
Before you leave, send the quick version. We will review the page you came from and reply with the clean next step.
