Start your EVOTECH request in under a minute.
TV Mount Subcontractor Jobs in Houston 77043
Spring Branch West runs from the tollway to Blalock and mixes post-war ranch streets with small-bay commercial parks. EVOTECH IT LLC contracts independent installers to run the mounting tickets that come out of it.
A Trade Partner Agreement, Not a Job Posting
EVOTECH IT LLC has been running low-voltage and display work across west Houston since around 2004, and the mounting side of that calendar is covered by independent subcontractors rather than a payroll crew. If you landed here hoping to have a television hung on your own wall, this is the wrong page — this one is addressed to the person holding the drill.
The arrangement is straightforward. You operate as your own business. We hold the contractor licence, own the customer relationship, quote the work, collect from the client and hand you a written ticket carrying an address, a time window and a defined scope. You bring the vehicle, the hand tools, your own general liability coverage and your own judgement about what a wall can carry.
In practice that means:
- Assignments are offered rather than pushed at you by app roulette — you accept or pass, and passing does not cost you your standing.
- Scope arrives in writing before you drive: screen size, requested height, and whether concealment was sold.
- Compensation is discussed at interview and depends on scope and experience. Nothing about it belongs on a public web page.
- You invoice as a business against completed tickets rather than clocking hours.
Frontage Roads, Bays and Post-War Ranch Streets
77043 occupies the western reach of Spring Branch, bounded roughly by the Sam Houston Tollway on one side and the older residential grid around Blalock and Bingle on the other, with the Katy Freeway forming its southern edge. This is not walk-the-block territory. Nearly every address is reached from a feeder road, and the difference between a productive day and a wasted one is often which U-turn you take.
The residential streets north of the freeway — the grid threading Campbell Road, Kempwood, Hammerly and Wirt — were platted in the fifties and sixties and still read that way: single-storey brick houses on generous lots, wide driveways, heavy tree cover, and room to back a van up without blocking a neighbour.
Woven through that are apartment complexes along the Hammerly and Kempwood corridors and, increasingly, three-storey townhomes standing where a single ranch house stood five years ago. Move west and south and the character flips entirely into small-bay commercial parks and flex-office suites.
The practical consequences for a subcontractor:
- Parking is rarely the obstacle it is inside the Loop, but gated business parks may want a call ahead before you arrive with a loaded van.
- Tolls are your own cost of doing business here. Decide whether a given ticket justifies the tollway or the surface route.
- Freeway construction and feeder closures shift quickly; check the route before the window opens, not while the customer is waiting.
- A house call and a commercial suite in the same afternoon is completely normal. Dress and speak for both.
Substrates You Will Meet Between Bingle and the Beltway
Mounting is a structural decision before it is a decorating one, and this ZIP code hands you at least four different structures.
| What you are facing | What is behind it | What that means for the mount |
|---|---|---|
| Fifties and sixties ranch, interior wall | Wood studs, usually on sixteen-inch centres, under textured drywall or original panelling | A clean lag into two studs; sound the wall by hand, because a magnet reading through panelling misleads |
| Ranch house exterior wall | Brick veneer over sheathing and wood framing | The brick is a skin, not a structure — the fastener has to reach the framing behind it |
| New three-storey townhome | Engineered framing, occasional steel, tall stair runs, very little attic | Confirm the layout against the builder’s plate where one exists, and plan the panel carry before unboxing |
| Flex-office or warehouse suite | Concrete tilt-wall, or metal stud with an open ceiling above | A different anchor family entirely; metal stud alone will not hold a large panel without a backing plate |
The single-storey ranch stock does give you one thing no tower ever will: a reachable attic. Where the run is short and the framing cooperates, a top-plate drop is faster, cleaner and far more durable than any surface channel. Where it does not cooperate — and a slab-on-grade house offers no floor chase to fall back on — say so plainly on site and let us price the honest solution rather than the pretty one.
We would far rather hear “this wall needs a different approach” from an installer standing in the room than read it in a callback report a fortnight later.
The Standard Every Completed Ticket Is Measured Against
A five-star record is not held together by speed. It is held together in the final ten minutes of a job — precisely when a rushed installer starts packing tools.
The bar we work to, and the bar we inspect against if a customer ever raises a concern:
- Level checked on the bracket and again on the seated panel, not once at the beginning and never afterwards.
- Mounting height agreed with the customer out loud before a hole exists — seated eye level, not showroom height.
- Fasteners matched to the substrate and engaged in real structure, with no load resting on drywall anchors.
- Cable concealed where concealment was sold and dressed neatly where it was not; nothing left swinging behind the screen.
- Power handled correctly. Relocating an outlet is electrical work with rules attached, not an extension lead buried in a wall cavity.
- Debris carried out, drill dust vacuumed, and the customer shown the finished picture and the tilt range before you leave the room.
Completion photographs travel back with the ticket. They protect you at least as much as they protect us: when a panel is reported crooked three weeks later, a dated image showing a level bracket ends that conversation in about a minute.
Onboarding: From First Call to First Ticket
There is no application funnel and no chatbot standing between you and a person. The sequence is short.
- Make contact. Ring (832) 359-2425, or write to us using the contact form. Say where you are based, what you drive, and roughly how many mounts you have behind you.
- Talk properly. A real conversation about substrates, concealment, oversized panels, and the jobs that went sideways. Everyone has some. We care far more about how you handled them.
- Paperwork. Business details, W-9, and evidence of general liability coverage. Camera and alarm work carries its own registration requirements in Texas, so ask about that rather than assuming mounting experience transfers to every category.
- A first assignment. Usually a straightforward residential mount inside 77043, so each side can watch how the other works.
- A route. When the finish holds up and the customer feedback holds up, volume follows on its own.
Terms, per-ticket compensation and how often you want the phone to ring are all settled in that conversation and not before it. We would rather have five subcontractors we would happily send to a relative’s house than twenty we have to inspect behind.
Related services
Frequently asked questions
Is this a 1099 subcontract or a payroll position?
Subcontract. You operate as your own business, invoice against completed tickets and handle your own taxes. Nothing here should be read as an offer of employment, benefits, or a guaranteed number of assignments in any given week.
How is compensation decided?
Per ticket, according to scope — screen size, concealment, substrate, access difficulty and whether a second person is needed. Figures are discussed at interview and reflect your experience. We do not publish rates, because a number quoted before anyone has seen your work means nothing.
Do you supply the mounts and hardware, or do I buy them?
Hardware inside the sold scope — the bracket, plates and concealment components — comes with the ticket. Consumables and tooling are yours: bits, blades, fasteners for unusual substrates, a stud finder you trust and a level you have not dropped off a ladder.
A customer asks for extra work while I am already on site. What then?
Stop and call the office. Additional work is quoted and authorised by EVOTECH before it is carried out, because the customer’s agreement and our coverage both attach to the written scope. Private side deals arranged in a living room end the relationship.
Do I have to accept tickets outside 77043?
No. Some subcontractors work a tight Spring Branch loop and nothing else, while others cover Katy, Cypress and the west side broadly. Tell us at interview what radius you genuinely want and we will call you for that rather than wasting your time.
Want Spring Branch mounting tickets?
Ring the office on (832) 359-2425, or use the contact page, and we will talk about substrates, schedules and terms.
Apply Through Our Contact Page
Ready for EVOTECH to help?
Before you leave, send the quick version. We will review the page you came from and reply with the clean next step.