TV Mount Subcontractor Jobs in Houston, TX 77036

77036 is route work, not one-off showpieces

Tickets in this ZIP cluster. A leasing office hands over keys to six units in the same building; a strip-center owner wants screens in three suites the same week. An installer who can sequence a building will get more done here before lunch than an installer chasing single appointments across town.

The person signing off is usually a property manager or a business owner rather than the resident, and that changes the job. The install follows a written spec — a set mount height, centered on a given wall, cord fully concealed or in a paintable raceway, nothing visible from the doorway. Every finished wall gets photographed and attached to the work order, because that photo is what settles a question three weeks later when a new tenant moves in.

Staging matters more than speed. Park once, carry once, work the building floor by floor, and keep hardware sorted so you are not walking back to the truck for a toggle. The installers who last in Sharpstown are organized, not fast.

Walk-up apartments, block walls and 1970s construction

Much of the multifamily stock around Sharpstown went up in the 1960s and 1970s: two- and three-story walk-ups with exterior stairs and no elevator anywhere on the property. Everything you own goes up on your shoulder, which is a genuine filter on who takes this work and on what ladder you own.

Behind the paint, three surprises come up again and again:

1. Furred-out block. Plenty of these exterior walls are thin drywall on furring strips over concrete block. A stud finder reads solid everywhere and tells you nothing useful. Confirm with a small pilot where the bracket will cover it, then switch to a hammer drill and sleeve anchors rated for the panel weight.
2. Textured ceilings. Sprayed and popcorn finishes shed the moment a ladder rail brushes them. A dust sheet and a vacuum are not optional, and in older units that texture may predate the rules about what went into it — do not sand or scrape it.
3. Rated demising walls. The wall between two units is a fire assembly. You do not cut a cable route through one under any circumstances. If that is the only path, the answer is a surface raceway on the tenant’s side, and dispatch will back you on it.

The single-family pockets of Sharpstown are a different animal again: 1950s and 1960s slab-on-grade ranch houses with wood framing, modest ceiling heights, and attics you can genuinely use for a clean drop down an interior wall.

Menu boards, waiting rooms and small-business displays

The Bellaire corridor and the strip centres off Beechnut, Gessner and Fondren carry an enormous amount of small commercial work. Restaurants want menu displays above a service counter. Salons, dental suites and clinics want a waiting-room screen. Grocery and retail want a promotional panel near the entrance where every customer walks past it.

Those jobs run by different rules than a living room:

• You are often installing during business hours with customers moving around you. Cordon the area properly, keep the floor dry, and clear dust as it lands rather than at the end.
• Menu and signage displays go high and out of reach, which means a heavier bracket, mechanical anchors into block or structure, and a second pair of hands on the lift.
• Power and data are almost never where the screen needs to be. The fix is a routed path in trim or raceway. An extension cord draped down a wall behind a counter is a fail and will be pulled out.
• Tenant improvement rules apply in leased suites. If a landlord approval is missing, that is a phone call, not a judgment call.

Vehicle, tools, insurance and the habits that keep you on the list

Tools first. For 77036 you need a hammer drill and masonry bits before anything else, plus sleeve and wedge anchors in a few diameters, toggle bolts, and a spare stock of bracket hardware — what comes in the box is routinely wrong for block. Add a ladder that turns on a stairwell landing, drop cloths, and a vacuum with real suction, because block dust and ceiling texture will ruin your name faster than a crooked TV ever could.

Vehicle: reliable, insured, and large enough to hold a full day of stops without repacking between buildings.

Paperwork: current general liability in your business name, a valid Texas driver’s license and auto cover, and a W-9. You operate as an independent subcontractor — your own business, your own tools, your own decision on every ticket — and you invoice EVOTECH for completed work. Anything in a scope that reaches line voltage or alarm systems stays with EVOTECH’s licensed people; we hold licensed and insured low-voltage contractor status, twenty-plus years of it, with a 5.0-star rating to protect.

Then there are the habits that decide who keeps getting tickets: answering the phone, arriving inside the window, photographing the work, and reporting a problem the minute it appears instead of after the invoice.

How work orders land, and how to get on the rotation

Work orders arrive by text: address, complex name, unit numbers, gate code, the leasing office contact, panel sizes and the specification the property manager has approved. Multi-unit tickets usually carry a soft deadline — the whole building before a lease-up date — rather than a fixed hour, which leaves you free to sequence your own day around traffic on the Southwest Freeway and the Beltway.

When a unit is not ready — no power, still being painted, no key at the office — you report it and move to the next one on the list rather than burning an hour waiting. That single habit is worth more to a property manager than anything else an installer does.

To apply, call (832) 359-2425 or send your details through the contact page. Tell us which days you are genuinely free, and whether you are comfortable with stair-only buildings, because that one answer decides how much of 77036 we can send your way. Rates are agreed at interview, based on scope and on the experience you bring.

Related services

Frequently asked questions